The Flip32+ von witespy - mal wieder etwas Neues...
- Themenstarter JUERGEN_
- Beginndatum
- Status
naja gut der PX4 hat den auch.
ABER;
2,5er Raster hat auch etwas.
wer einmal per SWD gearbeitet hat, will gar nichts anderes mehr machen.
und wer sich bätten Mühe gibt, bekommt dat sogar äusserst günstig.
das ganze für deutlich unter 8€
-> http://www.mikrocontroller.net/topic/202785
-> http://www.watterott.com/de/STM8S-Discovery
bei jedem STM32FxDiscovery ist er eh dabei.
Zuletzt bearbeitet:
sorry for the delay. I had computer problems and had to rebuild.
I will post a picture of the path. I would love to send you boards so you can tell me what I need to do to improve it, but word is that you will just not touch the boards and just send them over to timecop? . what what reason ?
thank you for all the kinds words. I do not understand what you mean. I can do anything you think is best for the software. please email me.
I will post a picture of the path. I would love to send you boards so you can tell me what I need to do to improve it, but word is that you will just not touch the boards and just send them over to timecop?
. what what reason ? thank you for all the kinds words. I do not understand what you mean. I can do anything you think is best for the software. please email me.
Zuletzt bearbeitet:
@Paul: Thx for very fast shipping, my order arrived today .... i´m very impressed, it takes only 14 days to ship from USA to GER.
My improvement idea that you make a little external second pcb which contains a baro and mag sensor to put it away from any power/magnetic fields.
Flip32 = only Acro
Flip32+ = all included
Flip32+enhanced = all Sensors but Mag and baro with second small pcb
Can´t wait to test your board..
My improvement idea that you make a little external second pcb which contains a baro and mag sensor to put it away from any power/magnetic fields.
Flip32 = only Acro
Flip32+ = all included
Flip32+enhanced = all Sensors but Mag and baro with second small pcb
Can´t wait to test your board..
@Jürgen - mit SPI wird es wohl eher nichts weil der sck für den MPU Interrupt, zumindest mit der OP Firmware, genutzt wird.
Und der NSS für den MAG.
Wenn schon richtig und die Verwendung einer 64poligen Variante der CPU.
@Paul - an enhanced yes but with MAG only on an extra PCB. And with pins in an order to fix the small MAG PCB over the Baro with an screw, than I can fix the foam for the Baro with MAG PCB.
PS: I am waiting still on - I think the Postman in Miami are sitting on the parcel since an week
Und der NSS für den MAG.
Wenn schon richtig und die Verwendung einer 64poligen Variante der CPU.
@Paul - an enhanced yes but with MAG only on an extra PCB. And with pins in an order to fix the small MAG PCB over the Baro with an screw, than I can fix the foam for the Baro with MAG PCB.
PS: I am waiting still on - I think the Postman in Miami are sitting on the parcel since an week
womit wir dann eigentlich schon fast beim QUANTON sind,
in einer abgerüsteten Varinte mit STM32F103RBT6 ... (STM32F103RGT6)
-> https://github.com/TauLabs/TauLabs/blob/next/hardware/Production/Quanton/quanton rev.1.pdf?raw=true
in einer abgerüsteten Varinte mit STM32F103RBT6 ... (STM32F103RGT6)
-> https://github.com/TauLabs/TauLabs/blob/next/hardware/Production/Quanton/quanton rev.1.pdf?raw=true
Zuletzt bearbeitet:
I would love to send you boards so you can tell me what I need to do to improve it, but word is that you will just not touch the boards and just send them over to timecop? . what what reason ?
. what what reason ?
I never say, that I do not touch the board! I'm looking for an other board, because Naze32 is to limited for all my wishes. I'm thinking about an own on. What I like on your board is that all pins are normal, and not only pads.
And I think its a good idea to use a bigger CPU for more ports.
But im stil interesting to get an answer with for my question.
And I write you twice an email with my address, but thats not really important!
I don't like to be an freeloader, like some people imply
Hi Paul / witespy,
it is good to have you here with us, thanks for finding and joining this thread. The Flip32+ arrived also here yesterday, thanks for this great board and its pricing. I am quite eager to test it out and see how it performs.
I can just speak for myself, but I would expect that just a few of us have a philosophical approach regarding the hardware they are using. Your orders going to Germany probably speak for themselves, as I expect them to be mainly from this forum, thanks to Juergen who always keeps us up to date with information about the latest hardware. As for myself, I am very happy to be able to grab an alternate layout of the naze with an attractive price.
Speaking about improvements: Most people here have grown to love the Harakiri firmware by Roberto. Which is (of course) based on Naze / STM32. This firmware just tackles feature by feature at a unbelievable pace, starting with ACC-AltHold, GPS-ACC-PH, Sonar and next Waypoints by Roberto, Mavlink by Meister, Airplane by Johannes, mwcrgb by carsten, etc. So right now we are at a point where probably quite a few people would like to extend their FCs with GPS, OSD, PPM RX, 3DR Radio Telemetry, Flying Christmas Tree LEDs, Current Sensors, etc - but 2 UARTs do not get us very far. So: If you could give us a FC with Naze32 compatibility and more Serials, i would sure be a buyer. Could we agree on 5 UARTs? Well, if Juergen says SPI, then let it be SPI... I just want to connect all the candy. And this is a BIG please If you could get it to us tomorrow, I would buy 10 FCs . Oh yes, please make if capable of firing a heavylifter... that by next year would be totally sufficient.
Thanks and regards,
Oliver
it is good to have you here with us, thanks for finding and joining this thread. The Flip32+ arrived also here yesterday, thanks for this great board and its pricing. I am quite eager to test it out and see how it performs.
I can just speak for myself, but I would expect that just a few of us have a philosophical approach regarding the hardware they are using. Your orders going to Germany probably speak for themselves, as I expect them to be mainly from this forum, thanks to Juergen who always keeps us up to date with information about the latest hardware. As for myself, I am very happy to be able to grab an alternate layout of the naze with an attractive price.
Speaking about improvements: Most people here have grown to love the Harakiri firmware by Roberto. Which is (of course) based on Naze / STM32. This firmware just tackles feature by feature at a unbelievable pace, starting with ACC-AltHold, GPS-ACC-PH, Sonar and next Waypoints by Roberto, Mavlink by Meister, Airplane by Johannes, mwcrgb by carsten, etc. So right now we are at a point where probably quite a few people would like to extend their FCs with GPS, OSD, PPM RX, 3DR Radio Telemetry, Flying Christmas Tree LEDs, Current Sensors, etc - but 2 UARTs do not get us very far. So: If you could give us a FC with Naze32 compatibility and more Serials, i would sure be a buyer. Could we agree on 5 UARTs? Well, if Juergen says SPI, then let it be SPI... I just want to connect all the candy. And this is a BIG please
If you could get it to us tomorrow, I would buy 10 FCs . Oh yes, please make if capable of firing a heavylifter... that by next year would be totally sufficient. Thanks and regards,
Oliver
Zuletzt bearbeitet:
OLIMEX Header board for STM32F103RBT6 CORTEX-M3
ist doch kein Problem, gibt es doch alles, und auch billig.
mit 64Beinen angefangen.
-> https://www.olimex.com/Products/ARM/ST/STM32-H103
ist doch kein Problem, gibt es doch alles, und auch billig.
mit 64Beinen angefangen.
-> https://www.olimex.com/Products/ARM/ST/STM32-H103
Hat jemand von euch schon einen Spektrum Sat am Flip32+ am Laufen. Ich bekomme das irgendwie nicht hin. Wenn ich das richtig verstanden habe, muss ich mit dem Spektrum Satellit an die RGV Pins oben rechts. Das Feature "Spektrum" ist aktiviert und das Mapping der Receiver Kanäle läuft auf TAER1234. Das Binding mit der Funke scheint zu funktionieren da die LED am Sat dauerhaft leuchtet. In der GUI bekomme ich jedoch keine Steuerbefehle angezeigt.
Wo wir gerade dabei sind. Einen Buzzer bekomme ich am Flip auch nicht ans buzzen ; )
Am FC ist alles richtig angeschlossen und das Feature ist aktiviert. In der GUI bekomme ich die Akkuspannung angezeigt aber das war es dann auch. Die Naze32 piept einem beim booten ja auch die Zellen Anzahl vor aber am Flip bleibt der Buzzer stumm. Bin für jegliche Vorschläge dankbar.
Wo wir gerade dabei sind. Einen Buzzer bekomme ich am Flip auch nicht ans buzzen ; )
Am FC ist alles richtig angeschlossen und das Feature ist aktiviert. In der GUI bekomme ich die Akkuspannung angezeigt aber das war es dann auch. Die Naze32 piept einem beim booten ja auch die Zellen Anzahl vor aber am Flip bleibt der Buzzer stumm. Bin für jegliche Vorschläge dankbar.
- Status
